I want to convert a SQL Enterprise installation to SQL Developer Edition , How can we achieve that ?
Guneet Kalra
↧
Convert SQL server from Enterprise Edition -> Developer Edition
↧
Installing application database on customer computer
We have a C#.net WPF application that uses a SQL Server back end. We will install SQL Express if needed as part of our installation process. What would be the best way to install our database? Backup/Restore?
Would it be best to assume a default instance of SQL Server - if InstallShield Express finds no SQL Server it will require installation. I assume that would be a default instance.
↧
↧
SQL Server 2008 R2 Management Studio install fails telling me to install Visual Studio 2008 SP1!
Hi,
I am getting the following error when trying to install SQL Server 2008 R2 Management Studio (SQLManagementStudio_x86_ENU.exe or SQLManagementStudio_x64_ENU.exe) on a new Toshiba Portege R830-10R:
Another version of Microsoft Visual Studio 2008 has been detected on this system that must be updated to SP1. Please update all Visual Studio 2008 installations to SP1 level, by visiting Microsoft Update.
I have all Windows Updates installed on this machine and I DO NOT have VS 2008 installed on this computer (VS2008 was never installed on this computer), but VS 2010 SP1 with .Net Framework 4.0 SP1!
I have sent all day trying to install either ones of the above .exe, but always get the same error message.
I have checked the registry and see that I do not have a HKLM\SOFTWARE\Microsoft\DevDiv\VS key but only a HKLM\SOFTWARE\Microsoft\DevDiv\VC key (probably since I configured VS1010 for C#). The HKLM\SOFTWARE\Microsoft\DevDiv\VC\Servicing\9.0 contains
SP = 1 and SPIndex = 1.
Please help.
Thanks.
Eric
↧
SQL 2014
Installed SQL 2014 CTP1 but cant browse any SQL 2012 tables with SSMS
Browsing fine to SQL 2008 R2 boxes
Any way around this or a fix out for this
It gives me the this error
↧
Change IP address
Hi gurus
I have an windows 2008 server with a sql 2008 r2 intance, I need to change the IP address of the windows server
1) do I have to change the sql server 2008 IP address ? if so where do I go and do this
2) do I have to reboot the server once the IP address has been changed, or just restared all sql servers.
Thanks gurus, I am just to new to sql .
↧
↧
Cannot re-install SQL 2008R2
I have uninstalled and re-installed SQL 2008 R2 three times now. Everytime I unistall remnants of old db remain and will not allow the installer to complete installation. I have failed db engine and mssql. I have deleted the SQL properties
from the registry and searched for any instances of any SQL folder or file existing and nothing is on my hard drive. This is a stand alone db. Any help offered would be appreciated.
↧
IBM DDS Gen 6 USB Tape Drive on MS SQL 2008
Hi All.
I just want to ask if MS SQL 2008 would recognize IBM Gen 6 USB Tape Drive as backup storage.
Thanks in advance!
Zap :)
↧
hi..can any share how to upgrade sql server 2008r2 to 2102 in production..
hiiiii...
pls..can any one ..share how to upgrade sql server 2008r2 to 2012 in real time production.
i am atteding intrviews, i am phasing problems.
pls share real time apoorch.
Thanks in Advance.
vijay
↧
How to do a silent install of SQL Server 2012 CU3 - SQLServer2012-KB2723749-x64.exe?
I am trying to do a script silent upgrade install of 2012 CU3, I tried SQLServer2012-KB2723749-x64.exe /q but seems doesn't work. Any help would be appreciated.
Tell me more...
↧
↧
sql server installation on server 2003 64 bit domain controller
I keep receiving an error when attempting to install sql 2008 (from local cd via logmein) on a 64 bit Server 2003 domain controller. The error occurs during the step: "Running post-Windows Installer configuration timing actions". And it has "SqlEngineConfigAction_Install_confignonrc_Cpu64" under the progress bar at the time the error occurs. The pop-up box says "The following error has occurred: The specified user group 'SQLServerMSSQLUser$ComputerNameHere$MSSQLSERVER' does not exist.
I have uninstalled & reinstalled several times. I've manually created the security group (local domain), SQLServerMSSQLUser$ComputerNameHere$MSSQLSERVER in an attempt to resolve the error. But everytime I start w/ a new install - I get this same issue.
Here is the log file:
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Exit code (Decimal): -2068643839
Exit facility code: 1203
Exit error code: 1
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Start time: 2009-05-04 09:47:38
End time: 2009-05-04 10:09:40
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20090504_093724\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.0.1600.22%26EvtType%3d0x1B7EFB24%400xD3BEBD98%401211%401
Machine Properties:
Machine name: BusSPECIALIST
Machine processor count: 8
OS version: Windows Server 2003
OS service pack: Service Pack 2
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature Language Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008
SQLProductFamilyCode: {628F8F38-600E-493D-9946-F4178F20A8A9}
ProductName: SQL2008
Type: RTM
Version: 10
SPLevel: 0
Installation location: F:\x64\setup\
Installation edition: STANDARD
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: Server15\SQLengine
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20090504_093724\ConfigurationFile.ini
ENABLERANU: False
ERRORREPORTING: False
FEATURES: SQLENGINE,SSMS,ADV_SSMS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: d:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
MEDIASOURCE: F:\
NPENABLED: 0
PID: *****
QUIET: False
QUIETSIMPLE: False
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: Server15\SQLengine
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: Server15\Smith,Server15\SQLengine,Server15\MSSQLSERVER,Server15\adminimstrator,Server15\Administrator
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 1
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20090504_093724\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xD3BEBD98@1211@1
Configuration error description: The specified user group 'SQLServerMSSQLUser$BusSpecialist$MSSQLSERVER' does not exist.
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20090504_093724\Detail.txt
Feature: Management Tools - Complete
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Passed
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20090504_093724\SystemConfigurationCheck_Report.htm
I have uninstalled & reinstalled several times. I've manually created the security group (local domain), SQLServerMSSQLUser$ComputerNameHere$MSSQLSERVER in an attempt to resolve the error. But everytime I start w/ a new install - I get this same issue.
Here is the log file:
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Exit code (Decimal): -2068643839
Exit facility code: 1203
Exit error code: 1
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Start time: 2009-05-04 09:47:38
End time: 2009-05-04 10:09:40
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20090504_093724\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.0.1600.22%26EvtType%3d0x1B7EFB24%400xD3BEBD98%401211%401
Machine Properties:
Machine name: BusSPECIALIST
Machine processor count: 8
OS version: Windows Server 2003
OS service pack: Service Pack 2
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature Language Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008
SQLProductFamilyCode: {628F8F38-600E-493D-9946-F4178F20A8A9}
ProductName: SQL2008
Type: RTM
Version: 10
SPLevel: 0
Installation location: F:\x64\setup\
Installation edition: STANDARD
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: Server15\SQLengine
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20090504_093724\ConfigurationFile.ini
ENABLERANU: False
ERRORREPORTING: False
FEATURES: SQLENGINE,SSMS,ADV_SSMS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: d:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
MEDIASOURCE: F:\
NPENABLED: 0
PID: *****
QUIET: False
QUIETSIMPLE: False
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: Server15\SQLengine
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: Server15\Smith,Server15\SQLengine,Server15\MSSQLSERVER,Server15\adminimstrator,Server15\Administrator
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 1
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20090504_093724\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xD3BEBD98@1211@1
Configuration error description: The specified user group 'SQLServerMSSQLUser$BusSpecialist$MSSQLSERVER' does not exist.
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20090504_093724\Detail.txt
Feature: Management Tools - Complete
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Passed
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20090504_093724\SystemConfigurationCheck_Report.htm
↧
SQL Server 2008 R2 problem, error 926
I have an installation on a private pc, SQL Server 2008 R2 developer edition. SQL Server Management Studio R2 does not work any more. I get the following error on startup of Management Studio:
database 'msdb' cannot be opened. It has been marked SUSPECT by recovery. See the SQL Server errorlog for more information. (Microsoft SQL Server, Error:926)
I cannot look into databases as before from SQL Server Management Studio. However, the databases are available from Visual Studio 2010 and can be opened from there.
I look into errorlog, I am able to run SP_readerrorlog for master database from SQL Serve Management Studio but it does not give me any answers.
My pc is set up with Visual Studio 2010 and afterwards I installed VS2012. Both VS installations coexist on the PC. I have not started to use VS 2012 yet.
I have no backup of the database. I have tried "repair" from the installation media. I still have the problem.
Regards
Tore
↧
Getting error "SQLBrowser start failed" continuously while installing SQL server 2008 R2? what's the solution
log/report:-
Overall summary:Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Exit code (Decimal): -2068119551
Exit facility code: 1211
Exit error code: 1
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Start time: 2013-06-28 00:26:42
End time: 2013-06-28 01:14:59
Requested action: Install
Log with failure: C:\Program Files (x86)\Microsoft SQL Server\100\Setup Bootstrap\Log\20130628_002358\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.50.1600.1%26EvtType%3d0xD9F8DE8D%400x0A2FBD17%401211%401
Machine Properties:
Machine name: TECHY
Machine processor count: 8
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature Language Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 0
Installation location: E:\MS SQL Server 2008 R2 Setup Extracted\x86\setup\
Installation edition: ENTERPRISE
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: True
AGTSVCACCOUNT: NT AUTHORITY\SYSTEM
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Automatic
ASBACKUPDIR: D:\Programs\SQL Server 08\Analysis Config\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files (x86)\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Config
ASDATADIR: D:\Programs\SQL Server 08\Analysis Config\OLAP\Data
ASDOMAINGROUP: <empty>
ASLOGDIR: D:\Programs\SQL Server 08\Analysis Config\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: NT AUTHORITY\SYSTEM
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: TECHY\VIJAY S. GACHANDE
ASTEMPDIR: D:\Programs\SQL Server 08\Analysis Config\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Automatic
CONFIGURATIONFILE: C:\Program Files (x86)\Microsoft SQL Server\100\Setup Bootstrap\Log\20130628_002358\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: False
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,REPLICATION,FULLTEXT,AS,RS,BIDS,CONN,IS,BC,SDK,BOL,SSMS,ADV_SSMS,SNAC_SDK,OCS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
IACCEPTSQLSERVERLICENSETERMS: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\SYSTEM
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE:
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSVCACCOUNT: NT AUTHORITY\SYSTEM
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: D:\Programs\SQL Server 08\Database Config\MSSQL\Backup
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\SYSTEM
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: TECHY\VIJAY S. GACHANDE
SQLTEMPDBDIR: D:\Programs\SQL Server 08\Database Config\MSSQL\TempDB
SQLTEMPDBLOGDIR: D:\Programs\SQL Server 08\Database Config\MSSQL\TempDB Log
SQLUSERDBDIR: D:\Programs\SQL Server 08\Database Config\MSSQL\Data
SQLUSERDBLOGDIR: D:\Programs\SQL Server 08\Database Config\MSSQL\Datab Log
SQMREPORTING: False
TCPENABLED: 1
UIMODE: Normal
X86: True
Configuration file: C:\Program Files (x86)\Microsoft SQL Server\100\Setup Bootstrap\Log\20130628_002358\ConfigurationFile.ini
Detailed results:
Feature: SQL Client Connectivity SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Analysis Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Reporting Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Integration Services
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Connectivity
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Business Intelligence Development Studio
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Books Online
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Microsoft Sync Framework
Status: Passed
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files (x86)\Microsoft SQL Server\100\Setup Bootstrap\Log\20130628_002358\SystemConfigurationCheck_Report.htm
↧
SQL 2K8 Installation Fails on Windows 2K8 R2 SP1
Hello -
Installation begins with a message from the Compatibility Assistant indicating that SQL Server 2008 has known compatibility issues. It says, "... you must apply SQL Server 2008 SP1 or a later service pack before you run SQL Server 2008 on this version of Windows." I have successfully run SQL Server 2008 SP3 to install pre-installation features. Nevertheless, installation of SQL Server 2008 fails with the following message: "Microsoft .NET Framework 3.5 installation has failed. SQL Server 2008 Setup requires .NET Framework 3.5 to be installed."
However, the .NET Framework 3.5 IS installed on the 2K8 R2 server and all OS updates have been applied. The SQL iso file has been downloaded on two separate occasions from the Microsoft Volume Licensing Service Center and has been burned to DVD using two different computers and DVD drives, yet the installation of SQL still fails. This is a brand new installation of WIN2K8 R2 SP1 with no applications yet installed.
Any thoughts on a remedy?
Thanks,
Dan Moseley
↧
↧
Installing SQL Server 2008R2 (Developer Edition) on Windows 8 Enterprise
I'm trying to install SQL Server 2008 R2 (Developer Edition) - 64bit on Windows 8 Enterprise and an error message comes up stating the SQL Server is not compatible with this version of Windows. Has anyone had any success in getting it installed and working? I was able to get it installed and running just fine on the Windows 8 Release Preview.
Thanks a bunch
-- Val
↧
Microsoft.SqlServer.Management.Sdk.Sfc 11.0.0.0 Not Found
Hi Group.
Using the "Connect To Database" button in Server Explorer all goes well until I click the "OK" button in the Add Connection dialog. When this dialog goes to literally add the connection to Server Explorer I receive the error "Unable to Add connection...file not found". Note that upon testing the connection with the "Test Connection" button it checks out okay. The file it states that can't be found is: "Microsoft.SqlServer.Management.Sdk.Sfc, version=11.0.0.0" or one of its dependencies.
I've tried:
1. Repairing Visual Studio via Uninstall/Repair
2. Using SQL's Server Installation Center to confirm all aspects are valid/correct - are
3. Searching for this error using the filename ...Microsoft.SqlServer.Management.Sdk.Sfc and there are reports of this problem but their error references the file as having version 10; mine references 11 and as well I have completed all of the fixes they
suggest with no effect.
I am using Visual Studio 11 Developer Preview. My thoughts are that in re-installing SQL Server 2008 R2 Express I somehow have lost or changed this file from 11 back to 10 and that VS-11 DP requires version 11.
If I'm right would you know how to obtain this file or how to go about repairing the installation other than how I've tried? If my assumption is incorrect, how to fix this problem?
Thank you for all input!
Glenn T. Kitchen VB.NET Forums
↧
Error error 80004003 when trying to install SQL Server 2012 SP1
I have not been able to install SQL Server 2012 SP1. I always get error 80004003.
↧
Error code:0x800F0906
tried all the way to install .net 3.5 in my windows8 pro pc but it did not worked.
can you suggest any other way to install the .net 3.5
and sql server 2012 is not getting installed due to the failed installation of .net 3.5
rajeeb lochan sahoo
rajeeblochansahoo@outlook.com
↧
↧
SQL Server 2012 non cluster availability design consideration
Hi,
What is the best practice for me to follow when consolidating multiple stand alone DB from SQL Server 2005 - 2008 boxes into just 2x SQL Server 2012 Enterprise nodes in two different sites (1 x physical server in PROD and 1 x physical server in DR with different geographical location and VLANs as well) ?
Because my understanding with SQL Server 2008 R2 (I Installed on top of the MSCS 2008 R2) is that I will need 2 nodes in each site as follows:
PRODSQL1
PRODSQL2
and then
DRSQL1
DRSQL2
respectively.
and the proposed design are as follows:
PRODSQL2012-1
DRSQL2012-1
only.
The problem is that not all of the Tier-1 app database has got Mirorring or Transaction log shipping capability, so I wonder what should I do to avoid major Database outage when I patch the PRODSQL2012-1 ?
What is the best practice for me to follow when consolidating multiple stand alone DB from SQL Server 2005 - 2008 boxes into just 2x SQL Server 2012 Enterprise nodes in two different sites (1 x physical server in PROD and 1 x physical server in DR with different geographical location and VLANs as well) ?
Because my understanding with SQL Server 2008 R2 (I Installed on top of the MSCS 2008 R2) is that I will need 2 nodes in each site as follows:
PRODSQL1
PRODSQL2
and then
DRSQL1
DRSQL2
respectively.
and the proposed design are as follows:
PRODSQL2012-1
DRSQL2012-1
only.
The problem is that not all of the Tier-1 app database has got Mirorring or Transaction log shipping capability, so I wonder what should I do to avoid major Database outage when I patch the PRODSQL2012-1 ?
/* Server Support Specialist */
↧
Sql2008R2 install on Windows Server 2008 R2 failes with "The ENU localization is not supported by this SQL Server media"
I have downloaded from our MSDN the English version of the SQL R2 INstall. When I attempt to install this on a Windows 2008R2 server that is English I get that error. Any Ideas?
needbrew
needbrew
↧
SSMS 2012 reports "Cannot find one or more components"
I have been unable to install SSMS successfully from Sql Server 2012 Developer Edition. Although the setup program reports that all the components were successfully installed, whenever I start SSMS I get a message that says "Cannot find one or more components. Please reinstall the application."
I have followed several message threads on the forum with a similar problem, but none of the proposed solutions seems to work. I have done several complete re-installs. The .NET frameworks 3.5.1 and 4.5 are installed and up-to-date. The Database Engine seems to have installed correctly, since I can access it programmatically through a .NET SqlConnection.
The sql_ssms_loc_Cpu64_1033_1.log does contain several entries of the form:
<Func Name='SetCAContext'>
<EndFunc Name='SetCAContext' Return='T' GetLastError='203'>
and
<Func Name='Sqlmsirc_CheckFeatureDependency'>
No ref-count registry data found in SOFTWARE\Microsoft\Microsoft SQL Server\RefCount\sql_ssms_loc11\1033
<EndFunc Name='Sqlmsirc_CheckFeatureDependency' Return='0' GetLastError='2'>
I am installing on Windows 7 Home Edition 64-bit.
John Kane
↧